Laser cutting machine laser center of gravity positioning steps

1,CNC positioning and packing method:

2,bevel center of gravity burn method:
       3,direct burn method:
      holding a piece of plank straight wood board, stand in the cutting employment table 85 degrees angle, the cutting head raised to the focusing lens interval employment table verbosity 1.5 times focal length position, open the laser shutter, continuous transport 200W laser beam, the level of rapid move to the wood to the focusing mirror below, may wish to see the vermilion board has a width from narrowing, but also from the narrow broadening of the laser beam to focus on the burned traces, the trace and the laser beam focusing process The transition is extremely close.When the most narrow traces of the location of the center of gravity, to record a little bit of this, measuring the distance between the planks spaced lens is the real position of the center of gravity of the laser beam,Due to the type of steps that require manual manipulation, there is a special need to be mindful of the dangers of peace and to avoid being undermined.
     Our company supply UV Laser Cutting Machine and laser Engraving Machine.

UV Laser Cutting Machine