What Should be Paid Attention Using Co2 laser Cutting Machine?

First, the use of cooling water connected to the first, using the principle of low into high, adjust the outlet pipe position to ensure that the cooling water filled tube, the tube can not be stored in the bubble, then turn on the power.

Second, the two laser tube support point to the total length of the laser tube 1/4 point, to ensure the flow of cooling water at 2L-4L / minute.

Third, pay attention to the protection of the laser output window.

Recommended product：CO2 Laser Ceramic Cutting Machine

CO2 Laser Ceramic Cutting Machine

Fourth, in the debugging process, by adjusting the laser support point or rotating laser orientation, in order to achieve the best output, then the laser fixed.

Fifth, be sure to pay attention: avoid accumulation of dust near the high-voltage electrode, to keep dry, high-pressure end as far as possible from the metal to prevent high voltage spark discharge.

Zhengye Technology provides safe and high quality of CO2 Laser Ceramic Cutting Machine, CO2 laser Cutting Machine. Welcome contact us for the quote.